Faded on left side of page on Canon C255

[tbsl]

Hi

Have a bit of an odd on whereby the printed/copied image is faded down the left side for about 2inches across and then all down that side of the page, Have replaced all drums & ITB belt but no difference. The test PG10 page is perfect.

Any ideas which direction to go next.

Thanks in advance

tbsl

[Andyboachie]

Re: Faded on left side of page on Canon C255

Hi

Have a bit of an odd on whereby the printed/copied image is faded down the left side for about 2inches across and then all down that side of the page, Have replaced all drums & ITB belt but no difference. The test PG10 page is perfect.

Any ideas which direction to go next.

Thanks in advance

tbsl

Hi,
Had it not been that you had a perfect PG10 Test, I would try and do a stop test immediately before the paper enters the fuser to see if the fading across happens before or after the fuser. How about carefully cleaning the laser again, even if you have done that already? Then observe the movement of scanner if there could be some hitches in its movement.