ask for PSST322E.exe to canon ir3300

[AIT MAMEUR]

in my machine error occured e602 003 then machine not ready, but i haven't sst tool and system software so please help me.

[zaza]

hi dear friend

in my machine error occured e602 003 then machine not ready, but i haven't sst tool and system software so please help me.

E6020001A mounting fault of the HDD is detected when the HDD is started up from the BOOT ROM0002A data read fault of the HDD is detected when the HDD is started up from the BOOT ROMhi friend try this solution ...and if you have any other problems can you asked in my mail ..mecanopharme@hotmail.fr

[zaza]

in my machine error occured e602 003 then machine not ready, but i haven't sst tool and system software so please help me.

hi friend technician ait mameur l have the manual for this ir 3300 well if you need it can you tell me your mail ..l will sand it

[AIT MAMEUR]

email : anadjia74@yahoo.fr

[AIT MAMEUR]

thank you very much, i hope it will success

[haydar64]

u can give +rep points

[eyalos]

SST for IR2270

is this SST will be ok for IR2270?

if yes can you send it to me too please

eyalos@gmail.com

thanks

Eyalos

[bnmand]

is this SST will be ok for IR2270?

if yes can you send it to me too please

eyalos@gmail.com

thanks

Eyalos

The SST (Service Support Tool) is generic. It's the firmware of the different series of copiers that's different. The IR2270 is in a different series to the IR3300 so it has different firmware.

[haydar64]

Check your PM.