canon irc3220 c1 calibration

[tekhock]

When I calibrating the C-1, what is better? autocal?visual cal and..
if i photostat the colour all is ok. But if print from computer the red colour have problem.
my english very bad sorry.

[Guest]

Personally I like to used autocal..
If you have printing issues matching colors, make sure you are using the correct driver for the job. When you print graphics using the post script driver is better. If you use PCL chances are the output quality will look different. Make sure you imagepass has the latest firmware loaded, check for updated patches and sometimes its just the file.

[tekhock]

colour replacement

at the last. i do quick adjustment solves my problem.

[Guest]

at the last. i do quick adjustment solves my problem.

That helps also.