Lately I've had 3 seperate machines, all in the Ira4200 series with similar issues in the the reader suddenly decides to not recognize a certain paper size. The latest of which is an iradv 4245 which will detect 11x17 or legal when placed on the platen glass but not ltr.
last week i had replaced the ccd because it was causing the background to be shaded gray.
Today i got called back because the size detection wasn't working properly and it threw an error.
the original error thrown was e000225-0001
I checked it in the service menu and followed the recommendations presented, reseated ribbon cables on ccd and reader board, replaced the cables, replaced the reader board, replaced the main pcb2.
I cleaned the glass and sensor under the glass and replaced that sensor as well.
running out of ideas and looking for suggestions.
last week i had replaced the ccd because it was causing the background to be shaded gray.
Today i got called back because the size detection wasn't working properly and it threw an error.
the original error thrown was e000225-0001
I checked it in the service menu and followed the recommendations presented, reseated ribbon cables on ccd and reader board, replaced the cables, replaced the reader board, replaced the main pcb2.
I cleaned the glass and sensor under the glass and replaced that sensor as well.
running out of ideas and looking for suggestions.
Comment