iRADV 8585 finisher

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Blues977
    Technician
    • Jun 2024
    • 15

    #1

    iRADV 8585 finisher

    Good every one,

    I have a unit iRADV 8585 with the attach photo for you guys to assist me what wrong with this finisher ?

    The machine is in working condition without the finisher after I unplug the finisher socket from the machine.
    I have upgrade the latest firrware ut still show the message. Any idea guys ?
    Attached Files
  • Blues977
    Technician
    • Jun 2024
    • 15

    #2
    Hi guys,

    Is me again. I would like to add in more information. This is a V2 finisher with puncher feature.

    If I just press "close" as instruct by the message and make copy the paper still will come out at tray A not tray C. The finisher
    still work. Can I say maybe the puncher unit problem ?

    Comment

    • nicknt82
      Trusted Tech

      100+ Posts
      • Nov 2011
      • 155

      #3
      Originally posted by Blues977
      Hi guys,

      Is me again. I would like to add in more information. This is a V2 finisher with puncher feature.

      If I just press "close" as instruct by the message and make copy the paper still will come out at tray A not tray C. The finisher
      still work. Can I say maybe the puncher unit problem ?
      Finisher have problem, if it no lift up and down on start up. Try to swap PCB for troubleshooting

      Comment

      • Blues977
        Technician
        • Jun 2024
        • 15

        #4
        The machine we have solve the problem by changing the machine DC Controller P.C.B

        Comment

        Working...