iR5540 skew

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • copicatt
    Trusted Tech

    Site Contributor
    250+ Posts
    • Nov 2008
    • 362

    #1

    iR5540 skew

    Have a customer that has reported crooked pages. I went by and it is definitely skewed as much as an 1/8 to a 1/4 inch. After multiple tests, I have found it is skewing on prints and copies (glass and feeder). Internal test prints skew also. This happens from all paper trays just the same. And it is also consistently skewed the same amount every page. Also happens on all colors. Anyone know of a tech pub or maybe Somoen has had this issue? Has me a little baffled. You can see in my example the bottom of the page.
    Attached Files
  • nicknt82
    Trusted Tech

    100+ Posts
    • Nov 2011
    • 153

    #2
    Originally posted by copicatt
    Have a customer that has reported crooked pages. I went by and it is definitely skewed as much as an 1/8 to a 1/4 inch. After multiple tests, I have found it is skewing on prints and copies (glass and feeder). Internal test prints skew also. This happens from all paper trays just the same. And it is also consistently skewed the same amount every page. Also happens on all colors. Anyone know of a tech pub or maybe Somoen has had this issue? Has me a little baffled. You can see in my example the bottom of the page.
    Cannot imaging with this type of print test. Print a Type 6 and type 10 please

    Comment

    • copicatt
      Trusted Tech

      Site Contributor
      250+ Posts
      • Nov 2008
      • 362

      #3
      I thought those test showed the issue best. You can see how off kilter it is at the top and bottom. I have since partially remedied the issue. Customer had ran labels and there was the end of a label on the driven registration roller.

      Comment

      Working...