Canon 5030i Paperjam on startup

[MBard]

Hello,

I‘ve Problems with my Canon5030i. On Start up the printer start the feeder and get one paper and create directly a Papier jam.At this Moment the Printer isn‘t ready to Print. It is in the warming Phase. After i remove the jam and start to print, there is Paper Jam after 3-5 Sites.

The paper jam error ist 0202 sensor 02.
what can it be?
Thanks a lot.

[nicknt82]

Hello,

I‘ve Problems with my Canon5030i. On Start up the printer start the feeder and get one paper and create directly a Papier jam.At this Moment the Printer isn‘t ready to Print. It is in the warming Phase. After i remove the jam and start to print, there is Paper Jam after 3-5 Sites.

The paper jam error ist 0202 sensor 02.
what can it be?
Thanks a lot.

try to print on cassette 3 and 4. Do it jam?

[MBard]

I‘ve only 2 cassetts but both create jam.

[nicknt82]

I‘ve only 2 cassetts but both create jam.

image.png

Check the picture, where you see paper jam. and take picture of jam code history for me

[MBard]

I think it is between 21 and 23. if i Print only one Page the Printer get 2 Pages and if there is paper jam there is one side Printed to half and a second paper is near 30.

[nicknt82]

I think it is between 21 and 23. if i Print only one Page the Printer get 2 Pages and if there is paper jam there is one side Printed to half and a second paper is near 30.

" if i Print only one Page the Printer get 2 Pages "

Solve this case first . take out cassette 1 then see inside will see pick up assembly of cassette 2. Print 1 page and check, Do the pick up roller pick 1 page or 2 page.
-if pick up roller pick 1 times, but 2 paper was picked so you much replace separation roller.