Good evening,
I went to look at 2 C5750's today after complaints about jamming, another tech' had already been for the same problem 2 weeks ago.
The jams logged were 0205, and both machines will feed perfectly from tray 2 but will jam from tray 1.
I cured one machine by fitting a new set of rollers to tray 1 but the other will not stop jamming, even with the new set of rollers and all other rollers and sensors cleaned.
Has anyone come across this before, as I'm thinking of fitting a complete new feed unit which is probably going to cost a lot of money & may not be the answer.
Many thanks ..... Gary
I went to look at 2 C5750's today after complaints about jamming, another tech' had already been for the same problem 2 weeks ago.
The jams logged were 0205, and both machines will feed perfectly from tray 2 but will jam from tray 1.
I cured one machine by fitting a new set of rollers to tray 1 but the other will not stop jamming, even with the new set of rollers and all other rollers and sensors cleaned.
Has anyone come across this before, as I'm thinking of fitting a complete new feed unit which is probably going to cost a lot of money & may not be the answer.
Many thanks ..... Gary
Comment