Reset Np 6218 E00
Hallo,how can I Reset this Maschine after replaced the Fixing Unit ?
-
-
I am stumped,, I cannot find which family the copier belongs to, so I can offer nothing more than this link to an online manual:
CANON NP6218 Service Manual
I may have it, I think it may be part of the 2020/2021/6221 family. This is how it is done for them:
1. remove the adjustment cover
2. turn the power off
3. press & hold service switch on adjustment board sw1
4. turn power on then off, let go of switch and turn power back on.
good luck,,, I am reaching here..."Once a King, always a King, but once a Knight is enough!"
-
Tanks thats it
Best regards from GermanyComment
Comment