[Jamming] Canon Ir Adv C5045, since i updated firmware from CDN issues like all 4 tray pickup j

[omkara1234]

Canon Ir Adv C5045, since i updated firmware from CDN issues like all 4 tray pickup together when i start the machine.

Also because firmware is auto updated it is not registered, i face now issue like error 8202 4206 tried all in this post

https://www.copytechnet.com/forums/canon/122732-ira-4035-cds-updater-error-code-82024206-a.html

The biggest trouble i face is, paper jam errors since update.

all trays pick up together and all paper gets jam. if i keep only one tray in, from which i am printing, paper jams are almost inexistent. this is true for all paper trays, so pick up unit has any trouble is ruled out.

no paper jam at all, if used from bypass tray.

since update even scans from ADF DADF are little strange. i went through std-pos auto settings, after install of pcb of reader yet same issue.

i am available on whatsapp +91-8160380109 if someone wants to do video call and help me, new advocate, bought RC machine, so cant spend much but willing to part with 30 USD for
1. firmware & SST run through.
2. issues with paper jams
3. any useful insight into machine.

regards
om sharma

[omkara1234]

Re: Canon Ir Adv C5045, since i updated firmware from CDN issues like all 4 tray pick

Canon Ir Adv C5045, since i updated firmware from CDN issues like all 4 tray pickup together when i start the machine.

Also because firmware is auto updated it is not registered, i face now issue like error 8202 4206 tried all in this post
IRA-4035 CDS updater error code 82024206

The biggest trouble i face is, paper jam errors since update.

all trays pick up together and all paper gets jam. if i keep only one tray in, from which i am printing, paper jams are almost inexistent. this is true for all paper trays, so pick up unit has any trouble is ruled out.

no paper jam at all, if used from bypass tray.

since update even scans from ADF DADF are little strange. i went through std-pos auto settings, after install of pcb of reader yet same issue.

i am available on whatsapp +91-8160380109 if someone wants to do video call and help me, new advocate, bought RC machine, so cant spend much but willing to part with 30 USD for
1. firmware & SST run through.
2. issues with paper jams
3. any useful insight into machine.

regards
om sharma

Ok, New Information is Firmware version is iAC 5051_V2 installed. I think this is wrong firmware installed and hence paper pickup unit are over excited and picking up more than required. kindly help me to setup old iAC 5045_V1 firmware.

[omkara1234]

Re: Canon Ir Adv C5045, since i updated firmware from CDN issues like all 4 tray pick

Canon Ir Adv C5045, since i updated firmware from CDN issues like all 4 tray pickup together when i start the machine.

Also because firmware is auto updated it is not registered, i face now issue like error 8202 4206 tried all in this post
IRA-4035 CDS updater error code 82024206

The biggest trouble i face is, paper jam errors since update.

all trays pick up together and all paper gets jam. if i keep only one tray in, from which i am printing, paper jams are almost inexistent. this is true for all paper trays, so pick up unit has any trouble is ruled out.

no paper jam at all, if used from bypass tray.

since update even scans from ADF DADF are little strange. i went through std-pos auto settings, after install of pcb of reader yet same issue.

i am available on whatsapp +91-8160380109 if someone wants to do video call and help me, new advocate, bought RC machine, so cant spend much but willing to part with 30 USD for
1. firmware & SST run through.
2. issues with paper jams
3. any useful insight into machine.

regards
om sharma

Ok, New Information is Firmware version is iAC 5051_V2 installed. I think this is wrong firmware installed and hence paper pickup unit are over excited and picking up more than required. kindly help me to setup old iAC 5045_V1 firmware.