IRC 5185

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Chaw
    Technician
    • Mar 2009
    • 48
    #1

    IRC 5185

    Good morning wanted to know if someone could help me with a jam that I am having with an IRC 5185, a jam code of 1001 tried to look in the book nothing was found not sure why I am having this jam issue, thank you for you help in advance you guys have a great day.

    thanks Chaw
    Tags: 5185, inlet, irc, sideways
    • 20YRSEXP
      Trusted Tech

      250+ Posts
      • Oct 2008
      • 281
      #2
      I think that is a finisher jam. Is there a saddle stitch finisher on it?
      Is the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it.

        Comment

        • Kopyrtek
          Copier Psychologist

          250+ Posts
          • Jan 2007
          • 407
          #3
          Its an inlet sensor delay jam.Could be on a W1 or W2.

            Comment

            • Oze
              Ricoh Fanboy

              1,000+ Posts
              • Jul 2008
              • 1663
              #4
              The inlet sensors on the Irc finishers(w1/w2)are notorious for falling sideways off their perch.
              It's a pain to remount them but it can be done...remove the inlet guide plate and push the staple assy away from HP...that will give you plenty of room to work.

                Comment

                • Chaw
                  Technician
                  • Mar 2009
                  • 48
                  #5
                  Thanks

                  Ok thank you, I will give that a try thank you for your time

                  Chaw

                    Comment

                    Previous template Next
                    Working...