Canon ir 4025 000107 jam

[mramlawi]

I wonder from this problem in this series of canon , the machine working fine and suddenly after wokring above 50 page the machine start to jam . Jam cause 000107 , problem in one side happened and two side same ,also once happened with me but another series 4225 same jamin but it didnt work.
i changed the value on service mode ,changed the paper ,replace fuser assmebly
Used another drawers same jam .

if any soultion will be thankful

[mramlawi]

Re: Canon ir 4025 000107 jam

6B741194-71C9-4D38-877E-1885561E7F60.jpg

[Brian8506]

Re: Canon ir 4025 000107 jam

[ATTACH=CONFIG]53166[/ATTACH]

I've had to add an extra wrap to the 2 sensor flags on the door. Also have had the flag pop out of the cradle. You have to remove the door and take off the transfer section to get to them. Not difficult

[mramlawi]

Re: Canon ir 4025 000107 jam

I've had to add an extra wrap to the 2 sensor flags on the door. Also have had the flag pop out of the cradle. You have to remove the door and take off the transfer section to get to them. Not difficult

yea i know that sensors also theres 2nd sensor for duplex , i will try to add extra wrap. Thanks

[kstan268]

Re: Canon ir 4025 000107 jam

yea i know that sensors also theres 2nd sensor for duplex , i will try to add extra wrap. Thanks

problem solve??

[mramlawi]

Re: Canon ir 4025 000107 jam

no still the same i stopped workin on it now i will work to solve it latter

problem solve??