[Misc] canon ir6570 print blank and then "wait to print " on panel forever.

[satitjangdee]

Machine on OK. When make copy scan unit work fine but paper out is blank. On panel shows "wait to print" and nothing do on machine.
I check corona wire all blocks are good condition, pin not broken, toner tank metal contact is ok.
No error message show.

[satitjangdee]

Re: canon ir6570 print blank and then "wait to print " on panel forever.

This morning I tried cleaning. Octagonal glass in the Laser Unit, the result appears that the machine is working normally. for unknown reasons But luckily nothing was damaged.

[COPIERTEC ASSOCIATES]

Re: canon ir6570 print blank and then "wait to print " on panel forever.

Machine on OK. When make copy scan unit work fine but paper out is blank. On panel shows "wait to print" and nothing do on machine.
I check corona wire all blocks are good condition, pin not broken, toner tank metal contact is ok.
No error message show.

Under service mode do a DC CON clear and re-start the machine ie COPIER>FUNCTION>CLEAR>DC CON,then switch off and on the machine.