Dead 6055

[Uniquer]

I have a canon 6055 adv. When i switch power on the green light lit with no indications of life and after 10 mins approx it works great but when i come back from standby mode it takes the same time to awake.
Yesterday, it never work whatever time i leave.
I am not sure itis controller or power supply.
And what percussions have to consider when i buy another controller .my current controller no. Fm3 9206.
Thanks

[wcanonw]

Re: Dead 6055

I have a canon 6055 adv. When i switch power on the green light lit with no indications of life and after 10 mins approx it works great but when i come back from standby mode it takes the same time to awake.
Yesterday, it never work whatever time i leave.
I am not sure itis controller or power supply.
And what percussions have to consider when i buy another controller .my current controller no. Fm3 9206.
Thanks

the printer is connected to transformer or stabilizer?
discard transformer or stabilizer, if the problem persists it may be a problem with the electric fluid.
You could also try to update the firmware of the printer