Message " The feeder needs to be checked " on DADF imagePRESS C 600

[Ingranaggio_rotto]

Good morning to the forum!
Here is my problem: Canon imagePRESS C 600 with DADF AR 1, the single pass version.
The display shows the message: "The feeder to be checked" and consequently the document feeder does not work.
The lower scanner is working properly.
I replaced in the DADF: both flat cables; the PCB Driver; the optical group; the RCon PCB!
I haven't solved the problem.
Both 5 Volts and 24 Volts come out of the RCon PCB.


Have you had a problem like this?

[wcanonw]

Re: Message " The feeder needs to be checked " on DADF imagePRESS C 600

Good morning to the forum!
Here is my problem: Canon imagePRESS C 600 with DADF AR 1, the single pass version.
The display shows the message: "The feeder to be checked" and consequently the document feeder does not work.
The lower scanner is working properly.
I replaced in the DADF: both flat cables; the PCB Driver; the optical group; the RCon PCB!
I haven't solved the problem.
Both 5 Volts and 24 Volts come out of the RCon PCB.


Have you had a problem like this?

check post

"The feeder needs to be checked"