If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I am using Canon 5550i.
High-capacity tray 3 is fixed to LTR,
What should be checked to change the paper size for use in A4?
what do you mean by High capacity tray? However if it is the usual multi purpose tray 3,there is an adjustment screw at the extreme end that you are supposed to slowly adjust for the machine to read the required specification.
Comment