Oc� PlotWave 300 is not downloading

[xenalit]

Good afternoon! OCE PW300 turned off spontaneously during operation. And after that it froze at 80% of the load and would not turn on.

When I try to reinstall the software, it reboots multiple times. The logs on the flash drive show that it tries to create a partition on the disk every time it reboots. I changed the hard drive, it doesn't help. What could it be?

[xenalit]

[nbanba771]

einstalling the controller firmware...??..i cant entre to ip mahne ?

[rysiulg]

Oce to install controller need usb stick -so i think you have it -latest is 1.6.2 (i good remember).
At first start it check that this is controller, clean disk and prepare c partition 4Gb and copy all data from stick -after that stick isn't needed -connect monitor and keyboard to controller, for first start make boot disk first USB, and just after restart change to hdd first (you can also can use ssd disk -which is cheaper; and works) ) . If you need password for bios is 6869767. after install you restore backup (it should be done before start install from operation panel or service laptop) with licenses -the second one isn't problem for me