iRADV4545 with unfocus image

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Blues Guy
    Trusted Tech

    100+ Posts
    • Aug 2009
    • 216

    iRADV4545 with unfocus image

    Good day everyone,

    I attach with sample print on my Canon iradv4545 machine. I have change almost the parts for this machine
    all P.C.B as well laser unit but can't find problem. Any one can enlighten me what's the problem with this machine ?

    Thank you4545 sample.pdf
  • doktor
    Trusted Tech

    100+ Posts
    • Jan 2010
    • 214

    #2
    Re: iRADV4545 with unfocus image

    Fixing unit ?

    Comment

    • techandtrader
      Trusted Tech

      Site Contributor
      250+ Posts
      • Jun 2016
      • 318

      #3
      Re: iRADV4545 with unfocus image

      fuser looks dead.
      I have used Canon Imagerunner parts for sale. Most are floor model Color and / Advances Imagerunner with some 3025 3235 parts. Several intact machines being parted.

      Comment

      • Blues Guy
        Trusted Tech

        100+ Posts
        • Aug 2009
        • 216

        #4
        Re: iRADV4545 with unfocus image

        Good day guys,

        Thank you for your suggestion.

        For your information I have power OFF the machine before the paper pass thru fixing unit.
        When I remove the paper the image is like the sample print I have attach.

        Thank you

        Comment

        • Venom
          Technical/IT Support

          500+ Posts
          • Nov 2009
          • 765

          #5
          Re: iRADV4545 with unfocus image

          Looks like the laser unit isn't in properly
          IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

          Comment

          • ARUN MISHRA
            Technician

            50+ Posts
            • Nov 2010
            • 79

            #6
            Re: iRADV4545 with unfocus image

            Originally posted by Blues Guy
            Good day everyone,

            I attach with sample print on my Canon iradv4545 machine. I have change almost the parts for this machine
            all P.C.B as well laser unit but can't find problem. Any one can enlighten me what's the problem with this machine ?

            Thank you[ATTACH=CONFIG]61766[/ATTACH]



            Replace Drum.
            sigpicARUN KUMAR MISHRA

            Comment

            Working...