If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a machine that throws E006 on a regular basis, fuser ass'y has been changed, connectors checked, manual shows fixing unit connection error, anyone had this problem ?
I have never had this problem, thankfully, it was mentioned that a DC-Con clear may resolve it. Be sure to print out door spec first, as you will have to re-enter some data.
"Once a King, always a King, but once a Knight is enough!"
Comment