E003 0002 irc 3380

[Van Steal]

Hi guys

Having this error code on 3380 have changed fixing flim and fixing ass'y with no joy The call was loged for e025 0002 (cyan) after checking toner bottle, motor, sensor, was going to come back with a drum. just before leaving e003 pops up having not gone near the fixing ass'y. I'm thinking it might be DC driver(have checked all fuses on this pcb) or DC con pcb as eo25 may be related. love to know if any of you guys or girls have had this fault.

Cheers

[Van Steal]

Before the repiles flood in i've cleared the error in service mode

[Guest]

Hi guys

Having this error code on 3380 have changed fixing flim and fixing ass'y with no joy The call was loged for e025 0002 (cyan) after checking toner bottle, motor, sensor, was going to come back with a drum. just before leaving e003 pops up having not gone near the fixing ass'y. I'm thinking it might be DC driver(have checked all fuses on this pcb) or DC con pcb as eo25 may be related. love to know if any of you guys or girls have had this fault.

Cheers

There is a post with some info regarding this error,
check it out. I posted some photos, maybe your having the same problem.
http://www.copytechnet.com/forums/ca...03-0002-a.html

[Van Steal]

Cheers Screwtape

I did check the that sensor arm was not bent but will try to change the switch tomorrow.

Great presention by the way

[Van Steal]

There is a post with some info regarding this error,
check it out. I posted some photos, maybe your having the same problem.
http://www.copytechnet.com/forums/ca...03-0002-a.html

Cheers Screwtape that switch did the job didn't bend it in enough, made a bigger adjustment today

[Guest]

Cheers Screwtape that switch did the job didn't bend it in enough, made a bigger adjustment today

Im happy you resolved your problem!
Thanks for posting back.

Screwtape.