sgcopiertech's thread

[Guest]

iRC3220N magenta solid print

hi, i have recently changed drums (whole set) for 3220N
after printing copies using:

PG>TYPE> 5 Full-sheet half tones for magenta only

i noticed the this drum is light compared to the other magenta
i have used.this result to a purple print-out when i want a blue
print-out.

my question is, is there any setting to darken per drum?

My answer
I would replaced that magenta drum. The purple output is resulting from the lack of magenta. Replace that drum, its probably not charging right. If the copier works with the other old drum, then you know what you might have to do.

[sgcopiertech]

under RUI

hi screwtype,
I manage to solve this problem last night accidentally, here is what i did.

I accessed the RUI of the machine,
I went to

additional function > custom settings > printer setting > settings

under print quality i adjusted the magenta density.

after this, all copies had been ok.

[Guest]

hi Screwtape,
I manage to solve this problem last night accidentally, here is what i did.

I accessed the RUI of the machine,
I went to

additional function > custom settings > printer setting > settings

under print quality i adjusted the magenta density.

after this, all copies had been ok.

Intersting!