Cannon NP7161

[Alex]

I got one Cannon NP7161 in start up it shows E000, this happen. I start the machine without conecting the 2 thermistors before it it have some paper jam error I rectified it. How I can entr the service mode. Pls help me

[Mirohav]

Reseting E000

1. Starting Service Mode

2. Selecting Service Mode

[ayeko.tgi]

e000 error cannot clear

i cannot start service mode press user mode key then 2 and 8 key 0.5 ore more and user mode key . how can i start service mode another way or what component i need to check

1. Starting Service Mode

1) Press the User Mode key.

3) Press the User Mode key once again.


2. Selecting Service Mode
1) Select the mode you want for making checks or adjustments (Table 10-701) using the
keypad.


that were effective immediately before the start of service mode.
2) Press the AE key.


3) Select the mode you want to use for making checks or adjustments using the keypad.


key.
4) Press the Start key to execute the selected service mode.

it is executing service mode.

To clear E000 through E004, operate as follows:


2) Press the Start key.
3) The copier will automatically turn off, clearing the error.