Canon IR5000

[RSCA]

I need a part number for a paper guide in the ADF. It's just past the cover that goes over the pick-up and feed roller assy. It's stiff black mylar with a bend in it and it's glued to the guide underneath that is removed with 2 screws and has a switch actuator sticking up through it. I hope this is descriptive enough. I coated it with packing tape for now but I don't think that will last. Thanks.

[Guest]

I need a part number for a paper guide in the ADF. It's just past the cover that goes over the pick-up and feed roller assy. It's stiff black mylar with a bend in it and it's glued to the guide underneath that is removed with 2 screws and has a switch actuator sticking up through it. I hope this is descriptive enough. I coated it with packing tape for now but I don't think that will last. Thanks.

This normally does not affect the performance, however if its causing problems tape sometimes helps or you can trim it I don't know the part# off the top of my head I'm not next to computer now I'm replying from my blackberry, I will post it in few with the part#.

[RSCA]

Thanks, I appreciate it. It was causing an original jam problem and there was enough cracking and pieces missing that even though I taped it I don't think it will last. It's a high volume Title company.

[Guest]

Sorry for the delay..
Plus it seemed like the website was down for a while.

FC3-0752-000- Sheet

[RSCA]

No problem. I appreciate the help.