Irc 3220

[tekhock]

Please help me....
my copier is canon irc3220N coming with C1. After i reset C1 to default, the print coming out with bad. the red colour very light.can teach me how to setting or any ideal? plese see picture below. thanks for help!!

[Canuck]

Get a set of Kodak strips and calibrate the rip...or use visual cal and do it by eye

[Kopyrtek]

Also doing a auto gradation will help.But as Canuck said do the Kodak strip cal too.Both will help with your issue.

[Kopyrtek]

Forgot to add...what is the life of your drums?Print out Pg prints to check the base machine before heading out to the C1.

[Canuck]

Good point...what does a copy off the glass look like