ir5000 (220V)

[waffu22]

Hi to all

I need your help and advice.

iR5000, this machine keeps warming up while printing. Warming up takes a second (30 sec). Sometimes error 0001 - 0000 comes up. New thermistor replaced but nothings change.

I need an advice please.

Thanks

[davidj7]

did you check the temperatures in service mode?whats the difference between C & E.Presume you checked the lamps are turning on

[kwazimoto]

first look at the connection on the back of the fixing frame some times you have to put washers behind it so it will make a better fix with the connector in the rear of the machine..and some time small piece of paper in there... also there is a small board under the lfr that the connection need to be sprayed out ..