Document feeder jamming irc_3220

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zfeghali
    • May 2025
    #1

    Document feeder jamming irc_3220

    HELLO AGAIN,

    Im not sure if there is a thread about the Document feeder jamming/multiple feeding the rollers and sep pad are new and just been replaced....i know this has been an ongoing issue i was just wondering if there was a premanent fix to it...any help would be greatly appreciated thank you in advance!
    Tags: document, feeder, irc3220, jamming, pads, reliably, seperation pad, white dots
    • mrfixit51
      Lead Service Technician

      1,000+ Posts
      • Oct 2008
      • 1975
      #2
      no goog news here...

      I can report no new ways to make this K1 feeder work more reliably than to make sure you are using the seperation pad, black plastic body, that has the 3 white dots on it to designate it as the updated part. This part has been in use for about 5 years, so I have to assume that is the one you are using. I replace the pads as soon as they start to complain of multifeed issues. Spring can be stretched some to increase pressure. It is a miserable feeder, that will only get better when the customer replaces the 3220 with a new box.
      "Once a King, always a King, but once a Knight is enough!"

        Comment

        • zfeghali
          #3
          mrfixit....thank fo your quick reply to this...do you have a part # for the sep pad just so i know that we are using the same one...im out in bermuda and im not sure we get the same parts this way if i have a part# ill make suer to order it...thanx again

            Comment

            • mrfixit51
              Lead Service Technician

              1,000+ Posts
              • Oct 2008
              • 1975
              #4
              FF6-2455-020

              Originally posted by zfeghali
              mrfixit....thank fo your quick reply to this...do you have a part # for the sep pad just so i know that we are using the same one...im out in bermuda and im not sure we get the same parts this way if i have a part# ill make suer to order it...thanx again
              It is in my hand,,, FF6-2455-020.

              Good luck!
              "Once a King, always a King, but once a Knight is enough!"

                Comment

                • baseball4
                  #5
                  Stretch the spring that is attached to the sep pad housing. This has been my fix 100% of the time. Caution though, do not over stretch spring!!!

                    Comment

                    Previous template Next
                    Working...