Part number

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Chaw
    Technician
    • Mar 2009
    • 48

    #1

    Part number

    Morning wondering if anyone can help me with a part number for a Black Toner Motor for an IRC 5185. Issue being the copier is making a very loud noise I ran a part check through all the Fans and the Clutches. when I ran through the Motors Motor # 5 gave me a squeaking noise, also I noticed that when i took out the ITB Belt there was Black Toner at the side of the belt around where the handles are. is it safe to say that the Black Toner Motor.

    Thanks much.
  • THUK
    Trusted Tech

    100+ Posts
    • Jul 2008
    • 195

    #2
    hi,the dropping of black toner tells me your black drum is worn out,take the black drum out and shake it over some A3 paper,is it leaking.it could be just the drum

    Comment

    • Chaw
      Technician
      • Mar 2009
      • 48

      #3
      part number

      thanks for the reply I did that also I replaced the Black drum with a new Drum the Drum in the Copier was well over 500, i also thought that would stop the noise but it didnt

      Comment

      • Kopyrtek
        Copier Psychologist

        250+ Posts
        • Jan 2007
        • 407

        #4
        FK2-2526-000 is the number for the motor.Since you are going into the back and will be having SO much fun,you might as well replace the ass'y
        FM2-5363-000.

        Comment

        • Chaw
          Technician
          • Mar 2009
          • 48

          #5
          lol thanks never had to chang out this motor before and for you sense of humor its not going to be fun I assume :-) lol lmao thanks for the help and the part number.

          Comment

          • Kopyrtek
            Copier Psychologist

            250+ Posts
            • Jan 2007
            • 407

            #6
            Have had to do a couple of them.Was never the type for a cordless in the field but,after the first one i invested in one.Couldnt count the number of screws i had to take out!!You'll see

            Comment

            • Chaw
              Technician
              • Mar 2009
              • 48

              #7
              Wow lol ok going to get one this weekend thanks for the warning

              Comment

              Working...