If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Your xparency/registration sensor LED's are probably dirty. They are located on the xfer bed underneath the narrow black cover held on by 3-4 screws. Remove cover and clean receiver and emitter portions.
Your xparency/registration sensor LED's are probably dirty. They are located on the xfer bed underneath the narrow black cover held on by 3-4 screws. Remove cover and clean receiver and emitter portions.
Comment