iR 1018 unable to distinguishe part

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DadO
    Trusted Tech

    Site Contributor
    250+ Posts
    • Dec 2007
    • 401

    #1

    iR 1018 unable to distinguishe part

    Hy fellow tech. I have problem locating the proper part from Parts catalog.

    Problem is that drum cartridge was full of waste toner and drum jammed.

    I cant find part that is inside machine that drive the drum but only the drum. On the left side of drum cart u have a small triangle connected to drum and when u close the door, gear inside machine snaps on that small triangle and drive it.

    Problem is that i cant locate that gear inside the machine via Parts C.!

    Please help

    Here is extracted pages from pc where that gear "should be"

    RapidShare: 1-CLICK Web hosting - Easy Filehosting
  • mjarbar

    #2
    Hello,

    1018 parts catalogue fig 102 parts 5, 7, & 17.

    It is a collar mechanism that springs into to drum to drive it.

    It can also be a pig to repair as you have to take the back of the machine apart to get to it.

    Comment

    • DadO
      Trusted Tech

      Site Contributor
      250+ Posts
      • Dec 2007
      • 401

      #3
      Extreme BIG gratitude mjarbar! otherwise would be calling canon tech support and look like dum* a*s. One question : how did u ever find it? I was probably looking at it but slipped it, lol.

      THX again, now i need to survive at least one month till i get the part

      Comment

      Working...