Acronise

[adel_nassan]

Hi every body
can some one help me
i need Acronise program to take an image from hard disk IR machine
please
my E-mail is :
adel_nassan@hotmail.com
thanks alot

[mrfixit51]

Acronis

Check your email...

[Blues Guy]

Hi..... mrfixit51 if you don't mind can you mail to me please. I also interested. My mail address vct8366@yahoo.com

[adel_nassan]

thanks alot
but when i download soft ware and installing it , and attach hard disk of IR2200 , the Acronise dosn't see the hard disk completely
can you help me , tell me the procedure to take image of hard disk
thanks again for help

[ymmtech]

Basically, open IR HDD in physical mode, save entire disk to image.

[mrfixit51]

I don't use that method...

thanks alot
but when i download soft ware and installing it , and attach hard disk of IR2200 , the Acronise dosn't see the hard disk completely
can you help me , tell me the procedure to take image of hard disk
thanks again for help

I don't use that method, as I am a certified Canon rep, and have access to all the tools I need to to accomplish the task. there are others here that use this method, and hopefully they will tell you how they accomplish the task with "ghosting" software. Good luck...

[adel_nassan]

ok thanks
but can you tell me what's the other tools you used???

[mrfixit51]

ok thanks
but can you tell me what's the other tools you used???

Service Support Tool, most recent system software available. That is how it is SUPPOSED to be done.

[VMGS80]

Sometimes Service Suport Tool gives me headaches; Older machines need older versions don t discard them some day will be useful.

[adel_nassan]

Service Support Tool, most recent system software available. That is how it is SUPPOSED to be done.

can i used sevice support tool with USB cable
i have laptop but there's no parralel port
is't work with USB cable or USB to parallel converter?????

[bnmand]

can i used sevice support tool with USB cable
i have laptop but there's no parralel port
is't work with USB cable or USB to parallel converter?????

You can use a Canon NetHawk cable (only usb to parallel that works).

You can use a standard IEEE1284 bi-centronics parallel cable with a desktop/laptop that has a parallel port set to ECP mode.

Newer machines can be used with SST via a crossover ethernet cable, but not this one.

Also note that for the IR2200, the firmware you need to use differs depending on whether your copier is networked or not.

[mrfixit51]

can i used sevice support tool with USB cable
i have laptop but there's no parralel port
is't work with USB cable or USB to parallel converter?????

This is an excellent reason to hang onto an older laptop that still has the parallel port. I grabbed up an old shop dog for just that purpose.