IRC 2380

[jose dai]

I need help color missmatching prints and copiers

[Kapten]

Is it possible to get some more info????

In first stage checkITB assembly.
Second Change ITB Assy

Give us more info then its possible to help...

How is pg 10 looking and pg6, is it misslining in feed dir .
Good Luck

[jose dai]

Coler missmatching

I made test print number 10,12,6 its ok but when i print and copy is a shame .and the machine has made only 10.450. Coler. But thanks any way i will chek the itb again

[jose dai]

IRC2380

There is no displacement only color missmatching,i tried to make a color missmatching corection

[mrfixit51]

I need help color missmatching prints and copiers

Do your prints appear to be o.k., but your copies don't match the colors correctly? That is what I read from your statement. If your registration is o.k. then I would not worry so much about the ITB. Be sure to run Auto Gradation, to sync the scanner to the print engine. This needs to be done everyday!

[jose dai]

irc2380 color missmatching

copies and prints come bad, i performed a gradiation adj,color miss matching correctiion and stir 4 but still

[Guest]

copies and prints come bad, i performed a gradation adj,color miss matching correction and stir 4 but still

Maybe its time to replace drums.
Stiring is not much of a requirement with these models.