Error code E602003

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • magedsanad

    #1

    Error code E602003

    hi evry frind

    I'v a problem in IR3300 code E602003
    I know it's HD but I need the system to fix the HD
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Everybody's your friend when you need something right? So you came here to get something for free. If and when you do get it, you'll be gone till you need something again.

    Comment

    • davidj7
      Service Manager

      Site Contributor
      1,000+ Posts
      • Jan 2009
      • 1107

      #3
      gee paul chill!!
      a machine is only as good as your tech : source:screwtape ; the scary one

      Comment

      • Sturay

        #4
        Walkaround

        Try to repair the HDD by holding down 1+9, hold the keys, power on the machine and keep the keys active while you're booting up the machine.
        Release the keys 1 and 9 when the display shows a square in the corner.
        Wait for an hour while the display shows "raining" squares.
        If you're lucky the faulty partition on the HDD might be fixed by the repair function.
        This walkaround does only work for the code E602-0003.

        Good Luck!
        Sturay

        Comment

        • mrfixit51
          Lead Service Technician

          1,000+ Posts
          • Oct 2008
          • 1975

          #5
          Here is a quick tip for you,,

          Just replaced one today...

          Listen to the hard drive through the back cover at the top left,,, if you hear it making any kind of noises beyond the quiet hum of a running hard drive, don't bother with the defrag,, it is dead or dying. Buy your hard drive and "find" the tools you need, Service Support Tool, and the System Software for your copier.

          Happy hunting!
          "Once a King, always a King, but once a Knight is enough!"

          Comment

          • davidj7
            Service Manager

            Site Contributor
            1,000+ Posts
            • Jan 2009
            • 1107

            #6
            alternativel simply search this forum and you will find tons of material on E602 on 3300
            a machine is only as good as your tech : source:screwtape ; the scary one

            Comment

            Working...