Help Setting a canon 3220 w/ imagepass c1

[Guest]

Hi


Help again


I'm trying to figure how I can enable the rip imagePASS-C1 on service mode, what software I need to download to configure the imagepass c1 and how I do that, there is a way to test if the fiery is set properly, please help.


Thanks

[Kapten]

C1 setup

If C1 ris is the same as europe do like this.
The C1 rip in europe is a backpack.
Enter sm mode Option / int- face / img-cont 3

Connect and be happy.

Configure the rip from copier display in printer meny.

You must enter at least Ip and subnet.



Use the right ps driver wit the right ripversion.
If you have 2.1 use the 2.1 driver not 1.0
Good luck