canon ir 1530

[gazza]

i have a canon ir 1530 with error code e245
have checked connection from counter board to main board
any other advice or will i have to change the board

[Copier_Guy]

i have a canon ir 1530 with error code e245
have checked connection from counter board to main board
any other advice or will i have to change the board

Product : imageRUNNER Series Title : E245 Problem :
E245

Solution :
The following steps should be taken in troublshooting an E245 code:

• Check for a loose connection between the Main Controller and the Counter PCB during a copy run.
• Check the screw is tight on the Counter PCB.
• Confirm the machine has been flashed to the latest software.
• Replacing the Main Controller will resolve the problem if the Counter PCB is working. Counter PCB must stay with copier. The Main Controller with E245 may not be bad but needs to be sent into Nationwide/Hytech to have the counters zeroed out.
• Defective Counter PCB. Refer to Technical Publication TP05 108a.pdf for the PCB part number.