irc3200

[nick_schmidt]

having feeder issues
when sending faxes thru feeder, different sizes LGL and LTR
goes into jam
but when doing the same process with copy setting works fine
and no, the customer is not leaving paper on the feeder fingers... lol
any ideas anyone?????
please help

also if anyone has heard of this problem on an irc5180


thanks very much

[mrfixit51]

customer is not leaving paper on the feeder fingers... lol

having feeder issues
when sending faxes thru feeder, different sizes LGL and LTR
goes into jam but when doing the same process with copy setting works fine and no, the customer is not leaving paper on the feeder fingers... lol
any ideas anyone?????
please help

Hi Nick,
At least I know you are reading the posts...

I have to assume that you mean ltr-r as well as legal? I have not run into that one. I believe the feeder uses sensors that are blocked for a time frame to determine the length of the documents. This copier is notorious for multifeeding. I would toss a sep pad into it to see what that did for the problem. At least you would be doing no harm at small cost to you, to see if that would resolve the issue...

[nick_schmidt]

thanks

You are correct, I do read the posts and try to help where possible.
I am kinda new to the field and still learning new stuff on a daily basis
I did try a new sep pad. no change
also yes, it is LTR-R
any other thoughts???
thank you for your help, you have helped me out in the past as well

[mrfixit51]

You are correct, I do read the posts and try to help where possible.
I am kinda new to the field and still learning new stuff on a daily basis
I did try a new sep pad. no change
also yes, it is LTR-R
any other thoughts???
thank you for your help, you have helped me out in the past as well

I guess jam codes are in order here,, description of DADF problem is still too general.

[etep571190]

Did you try this?
'Different Size Originals' must be set up in Scan Special Features when you want to fax mixed originals through the document feeder. Here's the procedure:

* First select the SEND tab on the display and enter the phone number you want to send the fax to:

* Select OK

* Press the 'ACS' icon at the right of the display. This icon has the resolution currently set and an arrow.

* Select 'OPTION' in the drop down menu. (This will bring up the Scan Screen)

* Select 'SPECIAL FEATURES'

* Select 'DIFFERENT SIZE ORIGINALS' (A dialog box will come up saying it is on when you select it)

* Press 'DONE'

*Press OK.

Using this procedure will prevent your mixed size originals from jamming in the document feeder when in fax mode. Remember you can only send orginals of the same width through the document feeder in mixed originals mode. (ie: LTR-R & Legal).

[nick_schmidt]

thanks

etep571190, thanks for the tip!!
I am going to check that out and see if that clears it up
I appreciate the help all