If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
What this error is? I have a iR 1600 SM and there is no that code.
Thanks
Check connector j104 on DC and J35/235 on Image processor. Check cable. Replace Dc Controller and then Image processor. Have you tried an all clear !!. Also try swiching the machine on without print board N1. I have had similar problem and the cause was the print board.
Comment