9070 Rebboting

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ricardobres
    Trusted Tech

    100+ Posts
    • Apr 2008
    • 147

    #1

    9070 Rebboting

    Hi guys

    I have a IR9070, and the machine rebooting direct. When I turn on the machine, it start the system, and reboot. The machine doesn't show a error code.
  • 20YRSEXP
    Trusted Tech

    250+ Posts
    • Oct 2008
    • 281

    #2
    Is the machine networked? Is it a new install? Has anyone serviced it recently?
    Is the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it.

    Comment

    • 20YRSEXP
      Trusted Tech

      250+ Posts
      • Oct 2008
      • 281

      #3
      The main controller can cause this issue. I believe the number is FM2-3409-000
      Is the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it.

      Comment

      • ricardobres
        Trusted Tech

        100+ Posts
        • Apr 2008
        • 147

        #4
        No, it's with C2 connect, and the customer turns off the machine on friday, and today when he turns on the machine, the problem appeared.

        Comment

        • 20YRSEXP
          Trusted Tech

          250+ Posts
          • Oct 2008
          • 281

          #5
          I would try the main controller. Before you do shut the machine down and unplug it. Then try reseatting the DIMMS and Boot ROM
          Is the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it.

          Comment

          Working...