iR 9070 no boot

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Juelis
    Technician
    • Aug 2009
    • 20
    #1

    iR 9070 no boot

    Tags: 9070, boot, contributing, lef
    • mrfixit51
      Lead Service Technician

      1,000+ Posts
      • Oct 2008
      • 1975
      #2
      I believe your best chance is to format your drive and do a clean install. When just doing the update without the format, be sure to check on "Overwrite existing files" in the lower left corner of SST, to make sure the files get transfered. Sounds like something got FUBAR'd when you attempted the updating, so that is why I suggest the clean install.

      Possible contributing factor could be corrupt files in your servtool folder for that particular model. If the clean install does not go well you may want to reload the system software on your laptop to assure you have complete set of code to load...
      "Once a King, always a King, but once a Knight is enough!"

        Comment

        • Juelis
          Technician
          • Aug 2009
          • 20
          #3
          Solved!

          Hi again

          Problem solved!

          The board boot the machine I was trying to upgrade a version was 4.34, down version of 6:36 will not accept update.
          Then it was "simple" fix. I changed the boot plate to version 6:36 and updated throughout the system x)

          Mrfixit51 Thanks for your help.

            Comment

            • mrfixit51
              Lead Service Technician

              1,000+ Posts
              • Oct 2008
              • 1975
              #4
              Originally posted by Juelis
              Hi again Problem solved!

              Mrfixit51 Thanks for your help.
              You are welcome,, glad to hear you resolved the problem!
              "Once a King, always a King, but once a Knight is enough!"

                Comment

                Previous template Next
                Working...