clc4040 with h1v2 rip

[alex@wocltd.com]

got a strange problem when running say a 5 page pdf (or ANY odd page doc)duplex print job when asking for more than 1 set the 1st page of the next set prints on what should be the blank last page of the 1st set? however when run as black & white you get your blank 'insert' - on colour does it regardless of driver ie ps or pcl ,the machine has the latest f/w & the rip is v2 -any thoughts?

[D_L_P]

How are you inserting the blank page? With Acrobat or the print driver?
I think the fix for that was to set the printer to "start printing after the last page is spooled" in printer properties>advanced. If it stared a duplex job before the last page got there it would do that. This goes back a while so it might just apply to older print drivers/OS.(98/me/2000)
Or if you are using the PCL driver the "Edit and preview" feature is very nice feature for combining or adding blank page.

[alex@wocltd.com]

thanks dlp - but the customer is a)corporate b)print and go - they are not interested in ANY workaround - so does anyone know of a patch?

[Guest]

thanks dlp - but the customer is a)corporate b)print and go - they are not interested in ANY workaround - so does anyone know of a patch?

Here are some not sure if you've seen these yet.

1-PE3O1 - blank gap in the images.
1-Q12OG - blank pages when printing booklet.
1-PWL9N - missing images, images in wrong location, H1 reboots.

[alex@wocltd.com]

thanks for the heads up screwtape - but I checked the euro canon parternet and could'nt find any relevant patches (and i've had issue's when putting patches on unnessciarly) - so still stuffed really.....