Canon CLC 1150 'loading' problem

[Guest]

Hello, we have clc 1150,
still good working but our server, after start, begins 'loading' and doesn't stop.
We tried eveything (restarts, ....) but it doens't stop loading.
is there a magic touch to stop this 'loading'?
or do we have to buy new server (which is hard to find or very expensive for such an old, but very good machine!)

Thanks for help!

Christophe

[Guest]

Firmware,HDD or memory is what I would start checking.

[trainman6446]

reload firmware on the imagepass. the software has gotten corrupted.

[Xtof]

thanks both,

sorry for late reply.

I think I have to call our 'canon mechanic' again to try this. He told us last time we had to buy new server....

regards and cold greetings from Belgium!

Christophe

[mrfixit51]

Hello, we have clc 1150,
still good working but our server, after start, begins 'loading' and doesn't stop.
We tried eveything (restarts, ....) but it doens't stop loading.
is there a magic touch to stop this 'loading'?
or do we have to buy new server (which is hard to find or very expensive for such an old, but very good machine!)

Thanks for help!

Christophe

Screwtape and trainman have given you the answer,,, too bad you are so far away. I assume your ColorPASS is a z650. I have one for sale in the "For sale, trade or wanted" forum on this site. I also have the system software for that particular device.

[Xtof]

hello Mr fixit,

we have a colorpass Z400...

No idea if this is compatible?

I'll have a look in the other section of the forum

Many thanks for reply!

Christophe

[seeb]

You will need to reload the Z400 system software via an external scsi drive.

[mrfixit51]

hello Mr fixit,

we have a colorpass Z400...

No idea if this is compatible?

Many thanks for reply!

Christophe

Hi Christophe,, no, they are different boxes, so my software would not work. Good luck in your quest!