Canon C1 - Fiery Q1 problems

[jpacheco@tigregraph.com]

Re: Canon C1 - Fiery Q1 problems

I can send you a copy for free if you can provide a postal address

Send me a copy of EF1-6163-000, my mailing address is Alayza CARLOS STREET AND ROEL 2030, Lima 14, Lima, Peru

[KenB]

Re: Canon C1 - Fiery Q1 problems

Send me a copy of EF1-6163-000, my mailing address is Alayza CARLOS STREET AND ROEL 2030, Lima 14, Lima, Peru

You want fries with that, too?

Sheesh!

[markdmt]

Re: Canon C1 - Fiery Q1 problems

dmt
900 north 400 W 312 NSL UT 84054

[fred]

Re: IPC1 Fiery Q1

Hi
To restore the system software of the Fiery Q1 you need the DVD 1 and 2 (EF1-6163-000 and FE1-6167-000) insert DVD 1 in the DVD drive and reboot the Fiery on DVD 1 this will format the HDD and reinstall the software later a message will prompt on the screen asking to insert DVD 2 when all done connect it to the network then run the setup turn on the DHCP then save the changes and after rebooting the Fiery print the configurations pages to see the IP address which will allow you to install the driver of this device
Good Luck

HI.
Could you please send me the two DV Fiery Q1 you need the DVD 1 and 2 (EF1-6163-000 and FE1-6167-000) ???