how to remove error 005 in canon 6330 photocopier
error 005 in canon 6330
Collapse
X
-
gurudronacharya
-
Open the front cover and on the right or left side of the inner front cover there is a small diameter hole that if you stick a paper clip into it will activate the service mode switch which will be denoted by a dollar sign on the control panel. From there push the additional functions key then 4 then the additional functions key again. From there go to error/clear and power cycle and it should be good to go as long as the web has been replaced. This is off the top of my head and it has been awhile so I hope I gave you the correct order. -
marvin
-
marvin
Comment
-
marvin
Comment
-
marvin
Comment
Comment