CANON IR 105 solid black

[xcopytech]

Hi,

have problem with IR 105 which print solid black. Printed image is visible under black. Also if print some text there is some white outline around text and everything else on page is black.

Thanks in advance.

[mrfixit51]

Hi,

have problem with IR 105 which print solid black. Printed image is visible under black. Also if print some text there is some white outline around text and everything else on page is black.

Thanks in advance.

If you turn off Potential Control,,, what happens??

[SCREWTAPE]

Hi,

have problem with IR 105 which print solid black. Printed image is visible under black. Also if print some text there is some white outline around text and everything else on page is black.

Thanks in advance.

What are you doing?
Are printing or making copies off the glass?

[xcopytech]

1. there is no changes when turn off potential control

2. same for copy and print jobs

thanks

[SCREWTAPE]

1. there is no changes when turn off potential control

2. same for copy and print jobs

thanks

Ok. Let's eliminate the possibilities. Check your laser specs in d-pot make sure they are within specs.
Check your pre exposure lamps.
If you can try swapping the primary corona rather than replacing it now.
Also the HVT can cause this.

For the hell of it try doing a CCD adjust, even though we eliminate the reader as being the problem because it happen when your printing.

One more thing, check special features and make sure your positive&negative feature is not enable. I seen some customers do some stupid things when they start poking around with settings.

Good luck

[bluemax121]

solid black but image is visable

hi
i have also same problam before but now its solved
first remove the boot ram and sd ram then clean the slates and rams
then insert them

i hope it work to u

have a good day