auto gradition in Irc 3100

[bluemax121]

hi
i have irc 3100n

when i give big job in between of printouts Auto Gradition was not coming so for copy quality going through changes after manuel gradition it will results acurate colours . is there any option to activate the auto gradition .

in advance thanks for suggesions

[SCREWTAPE]

hi
i have irc 3100n

when i give big job in between of printouts Auto Gradition was not coming so for copy quality going through changes after manuel gradition it will results acurate colours . is there any option to activate the auto gradition .

in advance thanks for suggesions

You can do it anytime you like. If you go into additional functions under/ adjustments cleaning/auto gradation adjustment. You have two options, quick adjust, full adjust.

[bluemax121]

hi
i know where i the gradition but my problam is
when i give 50+ images print job different colours r comming out
after manuel gradition colour will be perfect

i.e in irc 3200 inbetween of print jobs the mechin will do auto grdition

so that i am asking is there any option in irc3100 just like that

thank u

[mrfixit51]

"the settings of the image stabilization control timing cannot be changed."

I searched the service manual for a setting that might allow you to change how often the "image stabilization" process occurs, and it appears that it is written in stone how often this occurs. The above is an excerpt from the manual.

It appears that Screwtape's advice is the only viable answer,, you will have to manually perform this Auto Gradation more often. The 3100 series was fairly notorious for not holding color settings very well. the 3200 series did a much better job of maintaining it's color balance.