Ir 4570 in fax how to set auto rx above 3 rings????

[SESHU]

Hi...

Ir 4570 copier.. Fax mode in auto rx defaultlt set it to two incomming rings..

But i want increase to 5 incomming rings.. Then auto rx will automatically on..how??

How can i do.. How can i go?????

I can find out every function in fax settings.. But cannot findout auto rx incooming rings times ....

Any one know above this function...
Please reply guys....

[canonjh]

Hi,
1 select additional function then press 2 and 8 together then additional function again. This is to entry the mc mode.
2 Select Fax
3 NCU
4 Select Auto RX
5 select 07 the change it to 3( defualt is 2)
you have set the ring to 3
exit the mc mode
restart you copier.
for the monitor tone
go to additional function
communiction setting
fax setting
the icon will guide you from there

[SESHU]

hi,
1 select additional function then press 2 and 8 together then additional function again. This is to entry the mc mode.
2 select fax
3 ncu
4 select auto rx
5 select 07 the change it to 3( defualt is 2)
you have set the ring to 3
exit the mc mode
restart you copier.
For the monitor tone
go to additional function
communiction setting
fax setting
the icon will guide you from there

hi..

Thank you.. For great reply...
Hope it works...
Thank you very much..

I have manual.. But there is no explian about fax settings...
Thank you ..