clc1000 codee e061-0421

[postmart]

can anyone tell me what the error code e061-0421 means

[THUK]

hi,04 is the black and 21 is Vdc value is 750v or more.i would look at black ATR sensor black drum and dev,you might just have to re-init the black atr if dirty,also rewire primary.

[postmart]

Ok thanks, now im getting the error E020-0189 and sometimes E020-014D or something like that... so what should I be doing to fix this?

[charm5496]

more than likely you need to have a tech restart the developers and do a full PM on the machine for starters. With the E061 you could have dirt up in the drum cavity giving false readings, but your drums could be going bad as well.

[postmart]

Well i'll pull the drums and clean everything really well.. how do i restart the developers on the clc1000

[mrfixit51]

What are your qualifications to work on this copier?? You could easily dig a bigger hole for yourself than the one you are in now. My advice is to seek out a trained technician to accomplish this task.

[postmart]

Well, I've been working on printers for years, hp certs, this is my 1st venture into copiers, but with what I know about printers I'm very sure I can work on this copier, just might need alittle help.

[charm5496]

the CLC-1000 is not a machine you want to take on without the proper information and parts. The assemblies are much different from a office printer. It would be money well spent to find a tech in your area who will help you and teach you how to service the machine.

[postmart]

the CLC-1000 is not a machine you want to take on without the proper information and parts. The assemblies are much different from a office printer. It would be money well spent to find a tech in your area who will help you and teach you how to service the machine.

Ok I took everyones advice, I had a tech out, had a full cleaning done, and everything worked great for about a day .. now im getting the error e061-0422 now the tech got the same error when he turned it back on after cleaning it.. but he swapped something from the black drum to the blue... and it worked for him... But it sure didnt last. So what does that error mean? Any advice

[charm5496]

your drums are probably in need of replacement if he restrung the carona wires and the grids are in good shape.

The error code you are getting is for the black drum.

Did you watch the tech while he was working on the machine?
The CLC-1000 has issues with toner getting up in the potential sensors above the drums. If they were not cleaned and an EPC adjustment done in service mode that could cause the error to come back as well.