S1 Finisher stapling problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • CorkyShark
    Technician

    50+ Posts
    • Apr 2009
    • 51

    #1

    S1 Finisher stapling problem

  • SCREWTAPE
    East Coast Imaging

    Site Contributor
    2,500+ Posts
    • Jan 2009
    • 3396

    #2
    This is a well known issue with S1's. Replacing the offset rollers helps but if it does not help for you, then I would look at the timing between pick up and delivery.

    Comment

    • Canuck
      Tech Specialist

      1,000+ Posts
      • Nov 2007
      • 1713

      #3
      Try another brand of paper...junk paper will not run reliably in these machines

      Comment

      Working...