iR5000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • waffu22
    Technician

    50+ Posts
    • Jun 2009
    • 95
    #1

    iR5000

    Hi to all the readers

    Guys, do you know how to change Germany language to English language in iR5000?

    Please reply.


    Thanks.
    Tags: ir500
    • sgcopiertech
      #2
      you should have english system software

        Comment

        • 20YRSEXP
          Trusted Tech

          250+ Posts
          • Oct 2008
          • 281
          #3
          Go to service mode. copier>option>body then go to the third screen and select RMT-LANG. English is EN hit the +/- until you to get EN. This is assuming the english software is installed. It should be but if it isn't you will have to install it.
          Is the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it.

            Comment

            • Raoufselwaness
              Expert

              50+ Posts
              • Nov 2008
              • 75
              #4
              it is correct to as "20YRSEXP" said but take care if use it as printer you have to install the system agian
              using the sst program

                Comment

                • waffu22
                  Technician

                  50+ Posts
                  • Jun 2009
                  • 95
                  #5
                  Thank you guys for your reply specially to 20YRSEXP. I follow what you said and i did it and it works.

                    Comment

                    Previous template Next
                    Working...