CLC 3220 Fiery RIP C1 and C2

[Esperanta]

Dear Experts,

My question is simple.

what is the different between the C1 and the C2 rip, and can I use the C2 drivers on the C1 rip.

thanks

[Esperanta]

Friends,

Any information???

[mrfixit51]

Dear Experts,

My question is simple.

what is the different between the C1 and the C2 rip, and can I use the C2 drivers on the C1 rip.

thanks

Specifications
The imagePASS-C1 has the following features.
Hardware features
• 850MHz Intel Pentium III CPU
• 128MB memory, upgradeable to 256MB
• Parallel port for direct connection printing
• 10/100BaseTX network port for network printing
• Battery—3V manganese dioxide lithium coin cell (Panasonic CR2032 or equivalent)
• PCI connector for optional Token Ring connectivity
Networking and connectivity
The imagePASS-C1 has the following networking features:
• Supports AppleTalk, TCP/IP, and IPX protocols simultaneously
• RJ-45 port for twisted pair (10BaseT/100BaseTX) network connection
---------------
Specifications
The Unit-G1/F2/C2 has the following features.
Hardware features
• 1.2GHz Intel Celeron Mobile Pentium (ICP-M) CPU
• 256MB memory, upgradeable to 512MB
• Hard disk drive, minimum 80GB
• Battery—3V manganese dioxide lithium coin cell (Panasonic CR2032 or equivalent)
Networking and connectivity
The Unit-G1/F2/C2 has the following networking features:
• Supports AppleTalk, TCP/IP, and IPX protocols simultaneously
• RJ-45 port for twisted pair (10/100/1000BaseT) network printing
• USB—two Type A ports

Use correct drivers to get correct results!