Canon ir2200 Firmware

[Guest]

Hello,

HD on my ir2200 was damaged, but I have no Firmware backup files on my PC. I have only SST 4.22.
Help me please with Firmware files for my Canon.

[pearlpdy]

contact my pm i'll help u

[SergeyB]

contact my pm i'll help u

I sent private message.

[SergeyB]

Correct name of my model - Canon IR2200N. Please upload firmware to Rapidshare.com service.

[bnmand]

You'll need the firmware for the IR2200 and the IR2200N (some of the firmware is the same for both, but not all).

If you get it, be sure to not install stuff like the fax firmware if you don't have that option installed.

A hard drive format followed by one of the all options for IR2200N should be fine.

You should have a read of the SST manual if you have one.

You can use a IEEE1284 parallel cable if you have a parallel port on your computer (preferably XP). If you wish to use USB, you will need a special cable from Canon called the Nethawk cable.

[SergeyB]

I need the firmware for IR2200N (with fax).

[toni010x]

Canon IR2200 incorect Firmware

I have a IR2200 with network and i changed the HDD. After format with 1&9,when i run SST, give me an error like : "Your software version is not for this machine"
I have a iR2200N-XXxx2644-4A55-BOOT.PRG and in IR2200 exist a version 8.xx.

Please send me a correct boot, system, rui for IR2200 at toni010x@gmail.com .

Thank you!!

[tecaldryn]

Re: Canon ir2200 Firmware

Correct name of my model - Canon IR2200N. Please upload firmware to Rapidshare.com service.

Good morning, I need the system of canon IR 2200 can someone help me .. aldryn.alain@fullcopy.com.br